Your car got the scratches and you feel uncomfortable while going anywhere. You are missing the showroom-shine of your car again. Now you want that mirror-like shine on your car and ensure it lasts. Car wax is the solution to your problem. Wax is a protective covering on top of car paint. You want to wax your car by hand or electric buffer, Here I will guide you about how to wax your car to remove scratches and get a gleaming panel with a protective finish.
Preparation For Car Waxing
1. Choosing the Right Car Care Product
Before waxing the car, it is very crucial to choose the right wax or polish for the vehicle. If we use the right car care products then it takes a fraction of time to convert dull paintwork into the shiny look. If the scratches are in the clear coat, depending on the depth, then it might possible you can remove it by buffing out with electric buffer. If it is a bit deeper in paint then you can use the right Car Wax or polish to cover it properly with a durable finish. So It’s a Car protective against future damage from the sun, weather and cosmetic factors to maintain car value.
2. Best Conditions for Car Waxing
Don’t wax your car in direct sunlight or freezing conditions.
Choose a day with nice weather. Car waxing will work best if done at optimum temperature, in the garage or under the shade on a hot day.
Always do the process of car waxing indoor to avoid airborne contamination and bird droppings.
3. Remove Dirt and Grime
Car Washing
Before car waxing ensure that you wash your car properly with the best shampoo that increases the PH cleaning power that will be suitable for cleaning the toughest dirt. Then spray a lot of water with high pressure to remove all dirt and traces of suds. Then dry the working area properly.
Car Polishing
Now carefully polish the panels to find the defects. You can use a polish compound which has a slightly abrasive quality to remove previous wax, grease, and dirt to reach the undamaged paint underneath.
If you find any swirls or light scratches on the surface. Then it would be good to use the more abrasive product to renew the paintwork.
4. What Type of Car wax should I use?
There are different types of Car Waxes. You can choose any product that suits you and your requirements best. The most popular waxes are:
Spray Wax: You don’t need much time to apply it. It is the quickest type of wax to apply but makes sure to shake well first.
Paste Wax: Paste wax provides long-lasting results. However, as it is clear from its name that it is harder to apply and ultimately will require a lot of time.
Liquid Wax: It provides a durable seal on car paint and lasts for months. The only drawback is it takes longer to dry than solid wax. Always shake well before use to mix the ingredients.
How to Wax your Car by hand
- Before applying the wax, read the instructions given on the car wax package. Some brands have particular instructions so it is better to follow the guidelines.
- First, choose an area of the car to which car wax is to be applied. If you are using the Paste Wax then dip the pad in the wax equal to thumb-sized glob is on the pad.
- Spray the wax in case of spray wax, directly on the surface but keep in mind working on one section at a time.
- Apply the wax using a small circular motion. It is better to apply a thin layer of wax on the entire vehicle. To cover the entire surface of the car, You must use verticle or horizontal rows of circles.
- After applying the wax on the entire surface of the car, when it is dry. It appears as a chalky or matte-like look. First, the area where you started waxing should be dry.
- Remove the wax by rubbing in the wax with one side of a microfiber towel, chamois or soft cloth. Again use the circular motion to remove the wax. Take your time on each panel or section to get better results.
- Buff out the surface of the car to remove the remaining product with another clean side of a microfiber towel.
- You can repeat the process if needed.
Now you have removed car scratches via car waxing. Your car should glossy and shiny after removing the wax and car waxing process.
If you have not much time for waxing then there is an alternative to use the electric buffer or da orbital. It reduces the amount of time you spend on waxing a car by hand. Buffers are more suited to cars with large and flat panels.
Choose the best quality car wax to protect your car’s paint from sun rays, rain, snow, and abrasive specks of dirt.
