t20-win

Automobile · November 25, 2022

Recommendations for Using Bike Care Products to Maintain a Bike in Good Condition

A motorcycle is a prized possession that every true rider tries to preserve in the same condition they initially saw. They will maintain the bike to the best of their abilities. One of the most straightforward jobs you can complete is cleaning your motorcycle with bullet accessories. However, some unique methods and bike care products could provide you with the brightest shine possible.

Guidelines for Keeping a Bike in Good Condition

  1. Regular Tyre Inspection

It’s crucial to routinely check the air pressure in your bike’s tyres and their condition. Ensure that the tyre pressures are at par with the automaker-recommended levels. Inspect tyres for potential scrapes and cuts that could result in unfavourable events like tyre blowouts. 

Remember to check the treads on your tyres at least once per week. Moreover, don’t ignore checking wheel alignment and balance across the paddock stand.

  1. Check Engine Oil 

Your bike’s maintenance and operation depend heavily on the engine oil, among other bike care products. Always maintain a proper level of engine oil by doing routine checks. Investigate any potential oil leaks. Carbon deposits will cause the oil to thicken, which will make it harder for the engine’s internals to move. It’s crucial to realise that operating your motorcycle on contaminated oil will significantly shorten the engine’s lifespan and increase fuel consumption.

  1. Filter For Clean Air

Maintaining a clean air filter is essential due to the dusty climate in India, which can quickly clog the filter. Always replace the air filter when it needs replacing, and if the air is incredibly dusty, increase the frequency of cleaning.

  1. Releasing The Clutch

During the ride, you use the clutch frequently to switch gears at predetermined intervals. Correct adjustment and the appropriate quantity of free play are necessary for the clutch. Avoid overtightening your clutch because it will slip without your knowledge and increase fuel consumption.

  1. Engine

Your bike’s engine is its heart, so keep tuning and servicing it regularly to allow smooth running and save you big bucks on gas. Do use particular caution when preserving valve clearances and carburetor cleaning. Keep your carburettor clean at all times.

Make sure the float chamber and other carburetor parts are clean, make an effort every 1500 kilometres of driving. Don’t ignore the spark plug, which is crucial. They are the most important factor in effective engine combustion. So make sure they are tidy. and set the gap correctly. If not, replace the spark plug.

For two-stroke and four-stroke motorcycles, the optimal interval between spark plug cleanings is 750 and 1,500 kilometres, respectively. When starting most modern motorcycles today, do engage the choke. Utilising a choke aid in satisfying both the fuel economy and emission standards.

  1. Transmission System

Your motorcycle chain requires regular lubrication, cleaning, and adjustment. You may use bike care products such as paraffin for chain cleaning. Never use water to clean chains since it can cause the links to rust. A clean, dry towel can help wipe the chain after you have thoroughly cleansed the chain using a brush and paraffin.

  1. Making The Surface Clean

You must routinely clean the 2-wheeler body surface to maintain the surface quality. Make sure you cover the ignition switch unit, H.T. Coil, and silencer completely with plastic sheets before cleaning the motorcycle. Additionally, if at all possible, try to park your bike close to some shade. Your bike’s appearance will deteriorate if you expose it to sunlight frequently.

  1. Maintain The Battery

Periodic maintenance is necessary for your bike’s battery to ensure a long and trouble-free life. When necessary, add distilled water to the battery. Examine the battery for any leaks. Cleanliness and the absence of battery leakage are requirements for the motorcycle. You must ensure the battery has a complete charge when the bike is not active for an extended period.

  1. Keep Brakes 

Always keep the ideal distance between the two brakes that are grabbing the tyre. Brakes that are too tight or too loose provide a concern. It is best to customise the brakes to the needs and riding preferences of the bike rider. If the bike’s front brake pads are coming off and the screeching sound continues, there may not be enough oil in the system.

  1. Verify Each Cable. Carefully

Ensure that your bike’s cables have proper grease. Over time, cables tend to become harder and develop cracks, which causes excessive friction and can even cause the cable to break. Prevention is always preferable to treatment. Therefore, replacing any cables on your bike that show signs of cracking or stiffness is essential.

Endnote

Your motorbike requires some love and care to maintain it in shape, happy, and healthy, much like your motorcycle keeps you in perfect condition, functioning, and healthy. Visit Carorbis online to learn more about bike care products and how to use them effectively.

Also read How to Choose a Motorcycle Pannier Bag for riding?